Closing soon

20--SLEEVE,PROPULSION SHAF

Description: The Defense Logistics Agency is requesting quotes for four propulsion shaft sleeves (NSN 2010015104433), for delivery to DLA Distribution within 297 days after order. The solicitation identifies approved source part numbers 96169 H7130105-3 and 96169 H7130105B-3, and requires electronic quotations from responsible sources. It is a total small-business set-aside, and specifications, plans, and drawings are not available.

Buyer: Defense Logistics Agency
Federal · VA, US
Released: Oct 8, 2026
Closes: Oct 19, 2026(5 days left)

Files

Original attachments and procurement documents tied to this bid.

Federal RFP files are for Starbridge customers only.

You can request RFP files from all other buyer types for free on this site.

Key Contacts on this RFP

Decision makers connected to this RFP from Defense Logistics Agency.

Gabriella M. EarhardtAcquisition Executive, DLA Energy

*******@************

+1 (***) ***-****

Derrin E. WilliamsActing J31 Executive Director, Operations and Sustainment

*******@************

+1 (***) ***-****

Abelardo CabreraActivity Equipment Program and GSA Fleet Manager

*******@************

+1 (***) ***-****

Adarryl M. RobertsChief Information Officer, DLA Information Operations

*******@************

+1 (***) ***-****

Similar active RFPs

Adjacent opportunities open for bidding right now.

Defense Advanced Research Projects Agency (DARPA)
FederalVA
Posted
Sep 23, 2026
Closes
Oct 23, 2026
Fuel-Flexible Spacecraft Electric Propulsion System
This is a DARPA Small Business Technology Transfer (STTR) Direct-to-Phase-II topic under the DoW 2026 STTR Broad Agency Announcement, focused on space technology. It seeks a fuel-flexible spacecraft electric-propulsion system that can efficiently operate on air, water, or water/carbon-dioxide or nitrogen/hydrogen mixtures at greater than 30% electrical efficiency. Applicants must demonstrate prior performance and durability evidence, while the Phase II effort integrates and qualifies the thruster, power-processing, flow-control, and bus-interface systems for later spaceflight transition.
Dallas Area Rapid Transit
Special DistrictTX
Posted
Oct 1, 2026
Closes
Oct 28, 2026
Rebuild Miscellaneous Electronic Rail Propulsion Components RFP
Rebuild miscellaneous electronic rail propulsion components.
National Aeronautics and Space Administration
FederalDC
Posted
Mar 24, 2026
Closes
Mar 2, 2027
Technology Transfer Licensing Opportunity: Additively Manufactured Propulsion Catalysts (MFS-TOPS-120)
In mono-propulsion systems, a propellant is flowed across a catalyst to promote a chemical reaction and generate thrust. Conventional catalyst manufacturing methods entail (a) coating the inner walls of the thruster nozzle with a catalyst (generally undesirable due to limited catalyst-propellant contact), or (b) inserting a metal or graphite foam coated with a catalyst material into the thruster chamber. Method (b), while superior in terms of thrust generation, also possesses several limitations. Metal/graphite foams are difficult and expensive to procure, stochastic/random in nature (e.g., possess high variability in terms of geometric and other properties), and must be jammed into the thruster chamber using a compression plunger during installation – a process that often leads to catalyst damage. A new manufacturing method that improves repeatability, thruster reactivity, and tailorability (e.g., mechanical, chemical, and fluid flow) while reducing cost and lead time is thus highly desirable. To address this need, NASA and EOS developed methods to additively manufacture (AM) ultra-fine lattice structure propulsion catalysts.
NASA Marshall Space Flight Center
FederalAL
Posted
Mar 24, 2026
Closes
Mar 2, 2027
TECHNOLOGY TRANSFER LICENSING OPPORTUNITY: Additively Manufactured Propulsion Catalysts (MFS-TOPS-120)
NASA Marshall Space Flight Center (MSFC) is soliciting expressions of interest for licensing rights to commercialize additively manufactured propulsion catalyst technology (MFS-TOPS-120). NASA provides no funding and requests license applications via its ATLAS system (https://technology.nasa.gov/patent/MFS-TOPS-120). Responses are due March 2, 2027 at 4:00 p.m. EST and the notice is currently open.

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

Similar active RFPs

Adjacent opportunities open for bidding right now.

Defense Advanced Research Projects Agency (DARPA)

FederalVA

Posted

Sep 23, 2026

Closes

Oct 23, 2026

Fuel-Flexible Spacecraft Electric Propulsion System

This is a DARPA Small Business Technology Transfer (STTR) Direct-to-Phase-II topic under the DoW 2026 STTR Broad Agency Announcement, focused on space technology. It seeks a fuel-flexible spacecraft electric-propulsion system that can efficiently operate on air, water, or water/carbon-dioxide or nitrogen/hydrogen mixtures at greater than 30% electrical efficiency. Applicants must demonstrate prior performance and durability evidence, while the Phase II effort integrates and qualifies the thruster, power-processing, flow-control, and bus-interface systems for later spaceflight transition.

Dallas Area Rapid Transit

Special DistrictTX

Posted

Oct 1, 2026

Closes

Oct 28, 2026

Rebuild Miscellaneous Electronic Rail Propulsion Components RFP

Rebuild miscellaneous electronic rail propulsion components.

National Aeronautics and Space Administration

FederalDC

Posted

Mar 24, 2026

Closes

Mar 2, 2027

Technology Transfer Licensing Opportunity: Additively Manufactured Propulsion Catalysts (MFS-TOPS-120)

In mono-propulsion systems, a propellant is flowed across a catalyst to promote a chemical reaction and generate thrust. Conventional catalyst manufacturing methods entail (a) coating the inner walls of the thruster nozzle with a catalyst (generally undesirable due to limited catalyst-propellant contact), or (b) inserting a metal or graphite foam coated with a catalyst material into the thruster chamber. Method (b), while superior in terms of thrust generation, also possesses several limitations. Metal/graphite foams are difficult and expensive to procure, stochastic/random in nature (e.g., possess high variability in terms of geometric and other properties), and must be jammed into the thruster chamber using a compression plunger during installation – a process that often leads to catalyst damage. A new manufacturing method that improves repeatability, thruster reactivity, and tailorability (e.g., mechanical, chemical, and fluid flow) while reducing cost and lead time is thus highly desirable. To address this need, NASA and EOS developed methods to additively manufacture (AM) ultra-fine lattice structure propulsion catalysts.

NASA Marshall Space Flight Center

FederalAL

Posted

Mar 24, 2026

Closes

Mar 2, 2027

TECHNOLOGY TRANSFER LICENSING OPPORTUNITY: Additively Manufactured Propulsion Catalysts (MFS-TOPS-120)

NASA Marshall Space Flight Center (MSFC) is soliciting expressions of interest for licensing rights to commercialize additively manufactured propulsion catalyst technology (MFS-TOPS-120). NASA provides no funding and requests license applications via its ATLAS system (https://technology.nasa.gov/patent/MFS-TOPS-120). Responses are due March 2, 2027 at 4:00 p.m. EST and the notice is currently open.